DIY friendly with two black wires that can be interchanged between line and load to help prevent miswiring.A ground wire is required for installation Innovative Green Flex Sleeve wires to ground in homes with no neutral wiring or remove the sleeve and connect to a neutral wire if present in the wallbox.Shallow design easily fits in the wallbox and lead terminal wires for easier installation without having to bend wires around terminal screws.600W LED/CFL, 1800W Incandescent/Halogen, 1200VA Magnetic Low Voltage, 1200 VA Electronic Low Voltage, 1200 VA Fluorescent, ½ HP/9.8 Amp Fan/Motor, 15A Resistive.Press time option to turn on and will automatically turn off when time expires Four preset time option buttons 2-5-10-15 min with separate off button.Replace a standard wall switch with a countdown timer to ensure exhaust fans or lights are not left on unintentionally.To exit the EXTENDED ON state at any time, press any timer button or OFF button. The timer will automatically turn OFF after 24 hours. Yes, press and hold the top button for 5 seconds to override and keep the timer in an EXTENDED ON state. Is there a way I can keep the fan or light on longer than the set times? A ground wire is required for installation. If there is a neutral wire available, remove the green sleeve and connect neutral. The DT115, DT130, DT160, DT102, DT104, and DT112 have an innovative Green Flex Sleeve that wires to ground when no neutral wire is available. However, do not use to control lighting if it is the only light source in the area.ĭo the DT115, DT130, DT160, DT102, DT104, and DT112 countdown timers require a neutral wire for installation? Note that using a countdown timer will only turn fan on and off, not variate the speed.Ĭan I use a countdown timer switch for my bathroom light?Ī countdown timer can be used to control bathroom lights as well as lighting in other areas. Yes, press to turn the fan on for the specified time and it will turn off automatically. Perfect for retrofit applications where a neutral wire may not be present in the wallbox.Ĭan a countdown timer switch be used for a ceiling fan? Yes, it is designed to replace a standard wall switch and can be installed with or without a neutral wire. Do not use to control lights if there is no other light source in the spaceĬountdown Timer Switch Frequently Asked Questions Can a countdown timer replace a standard wall switch?.Ideal to use for bathroom exhaust fans, heat lamps, towel warmers, garages, attics, basements and more.Change color with DTKIT faceplates available in white, ivory, light almond, gray, black and brown (sold separately).Override can be disabled by pressing one of the timer option buttons or off button
#15 MIN TIMER SWITCH MANUAL#
Manual override keeps load on for 24 hours.Zero Cross turn-on technology to extend the life of the switch.
0 kommentar(er)
